Important Tips On Installation Of Crawl Space Insulation

Edging and ceiling insulation are very important during winter in your home. There are so many benefits, some of them; fewer problems with room ventilation, pipes not freezing, and energy efficiency. 

Before closing, make sure all equipment in the crawl space has a powered fuel system. You can also check for the best crawlspace insulation installation via the web.

Crawlspace Insulation

Image Source: Google

The insulation must be glued to the seams, and then tied. Once insulated, the house must be covered with a housing or vapor barrier.

The first step in insulating a crawl space is to seal any leaks. Be sure to seal the blocks. Pay special attention to drains, pipes, and electrical wiring. Then isolate and secure the area. Some prefer fiberglass, others a tub and ceiling to insulate the room. 

Insulate the entire surface and fill in the gaps. Use vapor barrier lath to cut and install insulation on plumbing and electrical. Use foam or foam and fiberglass for strip joints and air ducts.

The final step is termite shield and protection from moisture. Install a termite guard between the strip joint and the masonry foundation, leaving a 2-4" gap for termites. To prevent moisture from entering the crawl space, cover the floor with polyethylene.

The final step in insulating the ceiling is placing an airtight moisture barrier through the joists if there are holes in the barrier with masking tape. Then ensure good ventilation to prevent frost damage and allow hot air to escape.

Continue Reading